不锈钢清洗剂工艺操作

　　不锈钢清洗剂的主要成分是精细研磨料、阴离子表面活性剂、乙醇、溶剂、香精等。是专门为不锈钢锅具长期使用，经氧化产品的各种油污、黄锈、白膜、暗淡、黑斑等污渍清除和护理而研制的环保型不锈钢护理剂。用于进口高档锅具保养。同时也适用于电梯、栏杆、不锈钢台面等不锈钢顽固污渍的清洗和保养。

 

　　The main ingredients of stainless steel pot cleaners are fine abrasives, anionic surfactants, ethanol, solvents, flavors, etc. It is a kind of environmental protection stainless steel nursing agent specially developed for the long-term use of stainless steel pots and pans, the cleaning and care of various oil stains, yellow rust, white film, dullness, black spots and other stains of oxidized products. For the maintenance of imported high-grade pots and pans. At the same time, it is also suitable for cleaning and maintenance of stainless steel stubborn stains such as elevators, railings, stainless steel countertops, etc.
 

 

　　不锈钢清洗剂工艺操作

 

　　Stainless steel cleaner process operation

 

　　手工刷洗：利用刷子直接对不锈钢件表面进行刷洗，洗净后再用清水冲洗或漂洗干净即可

 

　　Hand brushing: directly brush the surface of stainless steel parts with a brush, and then rinse or rinse it with water

 

　　加温浸泡：将已兑水的不锈钢清洗剂溶液，加温到50℃－60℃，浸泡5-10分钟左右，洗净后再用清水冲洗或漂洗干净即可。

 

　　Warm soak: heat the mixed stainless steel detergent solution to 50 ℃ - 60 ℃, soak it for 5-10 minutes, and then rinse or rinse it with water.

 

　　喷淋清洗：用喷淋清洗机进行喷洗，如泡沫多可增加消泡剂使用。

 

　　Spray cleaning: spray cleaning machine for spraying, such as foam can increase the use of defoamer.

 

　　机械清洗：小工件宜采用机械振动搅拌清洗。

 

　　Mechanical cleaning: small workpieces should be cleaned by mechanical vibration agitation.

 

　　超声波清洗：建议使用至少有两槽以上的超声波清洗机，可一槽清洗、一槽漂洗，操作方便提高效率。

 

　　Ultrasonic cleaning: it is recommended to use an ultrasonic cleaning machine with at least two grooves. It can be cleaned in one groove and rinsed in one groove, which is convenient for operation and improves efficiency.